Fall Ribbon Eco Resin Stands

$40.00

Out of stock

SKU: Stand-fallribbonset Category: Tag:

Description

This listing is for a set of 3 stands. Two stands are 4″ x 4″ sq. One stand is 4″ x 8″ This is the only set available!

Clear Eco Resin with fall toned fabric ribbons embedded within give an earth toned welcome to your artwork. These are beautiful with nature themed artwork. These stands are terrific for triptych pieces, or break up the set and use individually.

Eco resin is a proprietary product of 3Form made with up to 30% recycled materials. Through a partnership with the Clever Octopus (a creative reuse center) these materials are available to artists for all sorts of projects. We like them best as stands for glass artwork!

Each stand is 4″ x 4″ square and about .5″ thick. The stainless steel rods are 1/8″ thick and coated with a clear heat shrink plastic to protect your artwork. The taller rods are 1.75″ tall, and the shorter center support rod is 1/2″ tall. This rod supports your artwork one half inch above the stand.

These stands are remarkably stable for the size and are recommended for artwork up to 8″ x 10″ or a 9″ circle. The stands are sized for artwork that is 1/4″ to 5/16″ thick (4-6mm) a standard fusing thickness for two layers of art glass or two layers of single strength float glass or one layer of 1/4″ float glass. The rods have are quite sturdy with a very little flex to firmly grip your artwork without squeezing it too tightly. Clean stands with warm soapy water if necessary, Isopropyl, Acetone and other solvents will damage ecoresin.

Designed with the artist in mind, these stands are low profile and unobtrusive giving the spotlight to your artwork.

Additional information

Weight 2 lbs
Dimensions 5 × 9 × 5 in