Engraving on Recycled Glass

'Woven' - Engraved Recycled Glass Vessel

Sometimes it is fun to just gear up and doodle on glass with an engraving tool. Typically, the engraving happens after the artwork is complete, so the lines are much more opaque and free form than the lines in the carved work featured here. I like to use my flex-shaft with a tiny diamond ball tip, and the same water set up as the glass carving.

Engraving can be a little tricky, since it is free hand, and the artwork isn’t usually flat. However, with a bit of practice, it is a nice way to expand your options.

‘Woven’ – Engraved Recycled Glass Vessel

Engraved Recycled Glass Dish – Created for Celtic Bank

‘untitled’ – Engraved Recycled Glass Bowl

‘Grapevine’ – Engraved Recycled Glass Vessel

‘Small Spirals’ – Engraved Recycled Glass Bowl

Tips and Trouble Shooting:

If the gap is too small to slide pieces together, you’ll need to widen it with either a diamond file or a diamond bit on a dremel tool. Use plenty of water and wear a mask.
Make sure the feet are level, if your vase isn’t balancing, you may need to grind the feet larger and flatter
If your fiber paper doesn’t come out cleanly, add water and dig it out with a skewer or hooked wire.
Yes, the vase can hold water

← Previous Next →

Fused Window Glass Heart Puzzle Vase

Puzzle vases are multiple part projects that slot together after fusing to create a 3 dimensional design. I love them because not only are they a fusing challenge, they are an engineering challenge. The finished art is a little mesmerizing, how does it work?? It's...

Bottle Glass Fish Sun Charm

What’s a Sun Charm? A little something that’s more than a sun catcher, but not quite a wind chime. I was in the mood to do some fusing and also use up a bunch of my jewelry making stash, so here we go! Materials: Fused Bottle Glass Fish Jump Rings Split Rings...

Lentil Bead Molds – Instructions

Lentil Bead Molds – Instructions Materials needed: Lentil Bead Mold (any size, or ALL the sizes for extra fun) Kiln Wash Glass frit Step 1. Prepare the mandrels. Each bead kit ships with a dozen mandrels and a tube of bead release, so you’re all set to go when your...