Full Fuse Firing Schedule

Full fuse firing schedule – Farenheit

Use this schedule for Bottle Bottom Molds, Fused Bottle Glass Donuts and Bead Molds

(1/4″ window or 2 layers bottle glass, sheets, not frit!)

Ramp Rate (F)	Hold Temp (F)	Hold Time
300/hr	500	15 min
250	1100	10 min
250	1550	8 min
9999/hr	1060	45 min
50/hr	940	0
100/hr	740	0
off to room temp

Full fuse firing schedule – Celcius

(1/4″ window or 2 layers bottle glass, sheets, not frit!)

Ramp Rate (C)	Hold Temp (C)	Hold Time
166/hr	260	15 min
138/hr	593	10 min
138/hr	843	8 min
9999/hr	571	45 min
27/hr	504	0
55/hr	393	0
off to room temp

Use this firing schedule for:

Tips and Trouble Shooting:

If the gap is too small to slide pieces together, you’ll need to widen it with either a diamond file or a diamond bit on a dremel tool. Use plenty of water and wear a mask.
Make sure the feet are level, if your vase isn’t balancing, you may need to grind the feet larger and flatter
If your fiber paper doesn’t come out cleanly, add water and dig it out with a skewer or hooked wire.
Yes, the vase can hold water

← Previous Next →

Fused Window Glass Heart Puzzle Vase

Puzzle vases are multiple part projects that slot together after fusing to create a 3 dimensional design. I love them because not only are they a fusing challenge, they are an engineering challenge. The finished art is a little mesmerizing, how does it work?? It's...

Bottle Glass Fish Sun Charm

What’s a Sun Charm? A little something that’s more than a sun catcher, but not quite a wind chime. I was in the mood to do some fusing and also use up a bunch of my jewelry making stash, so here we go! Materials: Fused Bottle Glass Fish Jump Rings Split Rings...

Lentil Bead Molds – Instructions

Lentil Bead Molds – Instructions Materials needed: Lentil Bead Mold (any size, or ALL the sizes for extra fun) Kiln Wash Glass frit Step 1. Prepare the mandrels. Each bead kit ships with a dozen mandrels and a tube of bead release, so you’re all set to go when your...