Marble Print Eco Resin Stand

This product is currently out of stock and unavailable.

SKU: S-MarblePrint Category: Tags: , , , ,


Marble print is an interesting and contemporary twist on a traditional stand material.  A hefty .5″ thick, the white marble print layer floats on a translucent clear layer of ecoresin for a modern look.  This handy little stands are made in our shop in Salt Lake City Utah with 3Form eco resin squares and stainless steel vertical rods.

Eco resin is a proprietary product of 3Form made with up to 30% recycled materials. Through a partnership with the Clever Octopus (a creative reuse center) these materials are available to artists for all sorts of projects. We like them best as stands for glass artwork!

These are my one of my very favorite stands, the pattern looks like city lights on a rainy night.  There is a bit of variation of color across the stands, please make sure you check the photos for a full range.  Available in two sizes, Small: 4″ x 4″ x .5″, and Large: 4″ x 8″ x .5″  The stainless steel rods are 1/8″ thick and coated with a clear heat shrink plastic to protect your artwork. The taller rods are about 2 1/8″ tall, and the shorter center support rod is 1/2″ tall. This rod supports your artwork one half inch above the stand.

These stands are remarkably stable for the size and are recommended for artwork up to 6″ x 8″ or a 8″ circle. The stands are sized for artwork that is 1/4″ to 5/16″ thick (4-6mm) a standard fusing thickness for two layers of art glass or two layers of single strength float glass or one layer of 1/4″ float glass. The rods are quite sturdy with a little flex to firmly grip your artwork without squeezing it too tightly.

Stand thickness: .5″

Stand sizes:  about 4″ x 4″ and 4″ x 8″  Stands are handmade and size may vary slightly.

Back:  Translucent

Edges:  Translucent

Additional information


Small, Large